John Henry Group Appointed as our Registered National Installer







Heavy Duty Adjustable Pedestals to Support Fibreglass Grating Panels up to 1Mt Above Floor Level

Pedestals are available to support all grating support applications.

Pedestals support two panels approx 100mm to 200mm high.

Pedestals supports panels approx 200mm to 500mm high.

Pedestals supports panels approx 500mm to 700mm high.

Pedestals supports panels approx 600mm to 800mm high.
Dura Tread Stainless Steel Fixings & Accessories
A full range of 316 grade stainless steel hold-down clips, clamps, panel-to-panel joiners pedestals, ramps etc are available to secure all types of Fibreglass Grating panels.

A large selection of panel hold-down clip systems are available to suit almost all applications.
S/S Square Recessed 'holding down' clip (Heavy Duty) - Inc. nut, bolt & washer.
S/S Square Recessed 'holding down' clip (Heavy Duty) - Clip only.
S/S 'M' Panel ‘holding-down’ clip (Medium Duty) - Inc. nut, bolt & washer.
S/S 'M' Panel ‘holding-down’ clip (Medium Duty) - Clip only.
S/S Dome headed surface mounted hold down device, excluding bolt, nut & washer - 30mm dia (Micro Mesh).
S/S Dome headed surface mounted hold down device, excluding bolt, nut & washer - 45mm dia (Mini Mesh).
S/S 'L' Panel 'holding-down clip' (Light Duty) - Inc. nut, bolt & washer.
S/S 'L' Panel 'holding-down clip' (Light Duty) - Clip only.
S/S Panel ‘holding-down’ clamp system (no hole drilling required) - Inc. square recessed clip, clamp, bolt & square nut.
S/S “G” Panel to Panel Joining Clamp - Inc. bolt.
S/S & plastic “pedestals” for raising panels 7mm–170mm above floor levels.
Phenolic resin fire resistant Grating 3.66m x 1.22m x 38mm Gritted.
GRP Embedment Angle (For concrete trenches/gullies 38mm x 25mm x 6m lengths) per sq m.
Fibreglass Edging Ramp Strips allowing wheeled access to suit all thicknesses (yellow gritted) per sq m.

Square and 'M' hold-Down Clips
![]() |
||
| 'M' Panel Clip | 'G' Panel Joiner | Square Clip |
|
'G' Panel to Panel Joining Clamps |
![]() Panel Hold-Down 'Clamp' Assembly |
![]() Top View: Panel Hold-Down 'Clamp' System |
![]() Side View: Panel Hold-Down 'Clamp' System |
![]() Bottom View: Panel Hold-Down 'Clamp' System |

Various Adjustable Stainless Steel Pedestals are available for raising panels above floor level.
Stainless Steel Pedestal. |
Stainless
Steel Pedestal. |

Stainless
Steel Pedestals.
Aluminium
Edging Ramp for 14mm Mini Mesh. |
Optional plastic insert to Raise Grating 5mm. |

Fibreglass Edging Ramps.







